Used Cushion Tire Forklift Pennsylvania - Most forklifts are classified by the kind of work they do and some are classified by their type of tires. The two types of tire classification for forklifts are:
1. Cushion; and
2. Pneumatic.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The benefits and potential drawbacks of the cushion tire models can only be compared when the pneumatic benefits and drawbacks are equally discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are comprised of treaded or smooth, solid rubber which is positioned around and affixed to a metal ring or baseband. These kinds of forklift tires are cheaper to make and easier to maintain. Cushion tires have been designed to work on smooth surfaces such as interior loading docks and warehouse floors. Cushion tires are also better suited to applications in tight spaces. This is because they offer a turning radius that allows for movement around tight corners. Cushion tires also allow the forklift to sit closer to the ground. The advantage of a lower forklift is the increased vertical clearance when compared to forklifts with pneumatic tires. Pneumatic tires provide better traction compared to cushion tires; especially on wet surfaces and outdoor locations.
Cushion tire forklifts are used for a wide range of applications, including order picking, unloading shipments, organizing inventory, transporting to and from a loading dock and other similar applications.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The main difference with these categories is that the standard air pneumatic tires consist of a layered rubber design filled with air and the solid resilient pneumatic type is made completely out of rubber.
For locations with uneven surfaces and unpaved ground, pneumatic tire forklifts are prime choices. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Forklifts that use cushion tires are a wise option for interior and exterior locations that feature smooth surfaces. The majority of forklifts that rely on cushion tires are used mostly indoors with limited outdoor use. They are often designed for use in areas such as manufacturing plants and warehouses. Cushion tire models excel in tight locations including narrow aisles and accessing high shelves.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Indoor forklift models that use cushion tires feature lower clearance compared to pneumatic tire models. This enables the machine to travel through doors and navigate obstacles such as sprinkler systems ad lights much easier.
3) Durability
Durability is a key feature with cushion tire forklift models as they are simple to maintain and offer zero to little risk of being punctured.
4) Quiet
Because the majority of cushion tire forklifts are powered by battery or fuel cell, instead of an internal combustion engine, they are much less noisy than propane or diesel powered forklifts.
5) Environmentally Friendly
Powered by electricity instead of relying on an internal combustion engine enables cushion tire forklifts to make zero dangerous emissions.
Forklift Tire Choice
The majority of forklift frames specify either a pneumatic tire or a cushion tire. Tires and axles are specific to the lifting capacity and the machine’s frame. The majority of forklift manufacturers create models to coincide with specific wheels and tires, usually cushion tires or pneumatic tires. Due to their special tire design, it is best to choose the forklift type that will suit the job in terms of forklift tire types.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are usually the best option for many workplace applications. If there is moderate use of the forklift outside on smooth surfaces and the majority of the lifting, loading and transporting will be occurring inside on smooth floors, a cushion tire model is an excellent tool.
Cushion tire forklifts typically feature a smaller frame and sit much lower to the ground compared to pneumatic tire models. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. However, cushion tire forklifts also have less clearance to the ground which can result in cushion tire forklifts getting easily hung up on outdoor obstacles where the surface is not cleared or even. One solution is to outfit traction tires on the front of the cushion tire forklift. Traction based tires will function in rough terrain environments that have wet surfaces, packed gravel and asphalt. These tires are not recommended for travelling on grass or dirt. Traction tires are utilized on the opposite sides, the steer and drive axles.
The smaller turning radius on the cushion tire forklifts is one of their main advantages. Cushion tire forklifts are excellent for manufacturing facilities and warehouse operations that are compact with less space. Locations that rely on narrow aisles will benefit greatly from the smaller cushion tire forklifts and their tight turning capabilities. Cushion tire forklifts are more cost-effective and available compared to pneumatic tire models.
Suitable Work Applications for Pneumatic Tire Forklifts
Since pneumatic tires contain air, these forklifts are better suited for exterior applications. Some interior locations may utilize pneumatic tire forklifts; however, they do not offer a small turning radius or the lower clearance and maneuverability that the cushion tires provide. Pneumatic tire models create harsh fumes with their internal combustion engines, making them unsuitable for interior locations. With a wider base and longer frame in comparison to cushion tire models, pneumatic tire forklifts are for use mainly outdoors.
The solid pneumatic tire costs more compared to the air pneumatic tire. This is because a solid pneumatic tire is not susceptible to punctures or gouges because they are made of solid rubber and do not have air in them. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Air-filled pneumatic tires work well on gravel and asphalt exterior surfaces. Air-filled pneumatic tires can easily become punctured and their working environment needs to be evaluated carefully. Because of this, it is necessary to make sure the work area is free of any sharp objects before using forklift fitted with air pneumatic tires at that site. Operator fatigue and discomfort can be traced to the bounciness of air-filled tires. Therefore, many air pneumatic tire forklift users prefer to foam fill their tires. The foam filling option creates a more even ride compared to the solid pneumatic tires or the bounciness of the air-filled pneumatic tires. Foam filling is commonly used for flat tire prevention. It is necessary to plan for enough time when foam filling an air pneumatic tire as it can take up to 3 days to fill and cure properly.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Some electric powered cushion tire forklifts do have lift limits. There are numerous forklifts available and a variety of pneumatic and cushion tire models can be found in a variety of load capacities. There are numerous load capacities ranging from less than 2000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
