When using rough terrain scissor lifts, it is really vital to use extra caution and be fully aware of your surroundings so as to maintain safety. The long booms on the machine act as levers from the drive unit's center. For example, a 6 inch bump could lead to a 3 foot bounce when the driver is at the driver controls. Take into account all other traffic in the vicinity, since they may not be aware that you are moving. Plan your assent carefully. Park the boom lift on a flat surface that has no mud or water. These areas conceal deep potholes which could be potentially cause the occupants to fall if the tires fell into the holes. If provided, utilize all of the outriggers, fully extended. Be sure to only use approved wooden chalk blocks.
A lot of lifts work from a metal platform on the end of the boom. The extended booms act as levers from the center of the drive unit. A 6-inch bump can result in a 3-foot bounce while you are at the driver controls. Be aware of all other traffic. They may not be aware that you are moving. Plan your assent. Park the boom lift on a flat surface free of any water or mud. These areas could cover deep potholes wherein the lift tires could fall, tipping the occupants. Extend all outriggers, if provided, completely. Place only approved wooden chalk blocks beneath the outrigger pads to prevent the unit from moving.
Overhead power lines are a serious hazard for lift drivers no matter what lift is being used. Like for example, if the driver of the platform is not being aware, or if the platform is being controlled by personnel on the ground which can not accurately access nearness to wiring and hence, either the worker or the platform itself could be easily brought into contact with electrical wires. The employee might be electrocuted unfortunately unless properly insulated.