In nearly all situations, most people spend quite a bit of money purchasing their lift truck. Hence, it is really important to take proper care of it in order to protect your investment well into the long run. It is really a great idea to know the procedures that are carried out in the care and maintenance of this piece of machinery.
Among the best ways to tell how good the engine is working is by starting the forklift up and listening carefully to see how it works. Like for example, if there are any knocks or misses, the machine is faulty and this should raise some issues. What's more listen closely for any squealing noise that come from the belts since these sounds will provide you with a lot of information.
Several of the main components requiring attention during maintenance comprise the horn, safety warning devices, gauges, the lights and the overhead guard. Any burnt out light bulbs or faulty parts should be replaced as soon as they are noticed. It is also vital to inspect the wiring.
The battery compartment terminals should be cleaned after the above parts have been checked thoroughly. If the terminals are not clean, be sure to clean them properly. Every cell of the battery should be inspected in order to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and then change the filters. The transmission filter, fuel filters and the hydraulic filter need to be replaced on a regular basis. Before fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
Once the oil change has been carried out and new filters have been fitted, visually check the drive axle from beneath the machine. Be sure to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the issue accordingly. After that, check each and every other part of the machinery including the wheels. If any kind of fault or concern is detected, be certain to address it immediately so as to make sure the machine is running at its safest and optimum levels.