Consider the Fast Charge Option
When it comes to recharging the battery of a forklift, there is an old rule of thumb which goes something like this: use the battery for a shift of around 8 hours, charge it for 8 hours and then allow it to rest and cool for another 8 hours. This formula has changed for numerous work operations which run more than one 8 hour shift. The fast charging choice has become an extremely popular alternative to conventional charging and since its development; numerous companies have opted to make the switch.
What Are the Advantages of Fast Charging?
Less Charging Time
Where the standard charger and battery was concerned, re-energizing a battery from a 20% state of charge up to a full 100% charge used to take around 8 hours. Fast charging can now accomplish this same charging in around an hour to an hour and a half! Numerous businesses use scheduled lunch and break times to accomplish this important job.
Easier Refills
The fast charge batteries will usually require a single-point watering system. This system means that users do not require removing the battery from the forklift to be able to water it.
Temperature-Sensitive Design
There is a thermistor located near the center cell on each new fast charge battery which helps it to monitor temperature. The charge rate is reduced and can occasionally stop once the temperatures get to a specific level. This is important so that the battery does not overheat. Unfortunately, this method could result in an undercharged battery. There are some specific fast charge battery brands that use inter-cell connectors, extra thick posts and copper inserts so as to decrease heat generation and increase conductivity because of the higher current. These features help to enable the battery to accept a higher charge rate for a longer time period.
These machines have seen their overall production increase significantly ever since the fast charge battery system was developed. Before, businesses used to require more than one machine when they were operating around the clock; nowadays they could save much money and utilize one forklift twice as much in a day with by using the fast charging batteries.